Detecting pore size distribution of activated carbon by low-field nuclear magnetic resonance

In this study, the transverse relaxation time (T₂) of activated carbon (AC) in different relative environment humidity was detected firstly by low-field nuclear magnetic resonance (LFNMR). The pore size (diameter) of AC distributions was calculated by the relationship between T₂ and surface relaxation rate (ρ), where ρ was obtained by the detection of nine porous materials with known pore size. The results showed that the pore size distributions of AC calculated by ρ < 0.19 nm/ms were in good agreement with that obtained by nitrogen adsorption method and proved that LFNMR as a new detection method was feasible for characterizing AC pore size distribution.     

The effect of scintillator materials on the fast neutron multiplicity measurement

Journal of Radioanalytical and Nuclear Chemistry - To analyze the effect of scintillator detectors on the fast neutron multiplicity, this paper uses Geant4 and Matlab to simulate and study three...     

In vitro and in vivo evaluation of a novel anti-EGFR antibody labeled with 89Zr and 177Lu

Journal of Radioanalytical and Nuclear Chemistry - There is an urgent need to develop more specific targeted therapies for lung cancer treatment due to the its low survival rate. EGFR is a...     

Molecular Bridging Enables Isolated Iron Atoms on Stereoassembled Carbon Framework To Boost Oxygen Reduction for Zinc-Air Batteries

Realizing the synergy between active site regulation and rational structural engineering is essential in the electrocatalysis community but still challenging. Here, a matrix-confined co-pyrolysis strategy based on molecular bridging is demonstrated to realize highly dispersed Fe atoms on stereoassembled carbon framework. Both polyacrylonitrile matrix and organic linker from metal–organic frameworks (MOFs) provide sufficient N-anchoring sites for the generation of Fe−N₄ moieties. A high Fe loading of 2.9 wt.% is readily achieved based on the scalable approach without post-treatment. Owing to the presence of highly exposed Fe−N−C sites and well-tuned pore structures, isolated Fe atoms on porous carbon nanofiber framework (Fe−SA/NCF) exhibits decent oxygen reduction activity and stability in alkaline conditions via a near four-electron path, demonstrating superior performance as air cathode for zinc-air batteries (ZABs) to commercial Pt/C catalyst.     

Single-Molecule Sensing of Acidic Catecholamine Metabolites Using a Programmable Nanopore

Acidic catecholamine metabolites, which could serve as diagnostic markers for many diseases, demonstrate an importance of accurate sensing. However, they share a highly similar chemical structure, which is a challenge in the design of sensing strategies. A nanopore may be engineered to sense these metabolites in a single molecule manner. To achieve this, a recently developed programmable nano-reactor for stochastic sensing (PNRSS) technique adapted with a phenylboronic acid (PBA) adaptor was applied. Three acidic catecholamine metabolites, including 3,4-dihydroxyphenylacetic acid (DOPAC), 3,4-dihydroxymandelic acid (DHMA) and 3-methoxy-4-hydroxymandetic acid (VMA) were investigated by PNRSS. Specifically, DHMA, which contains an α-hydroxycarboxylate moiety and an adjacent cis-hydroxyl groups on its benzene ring, reports two binding modes simultaneously resolvable by PNRSS. Assisted with the high resolution of PNRSS, direct regulation of these two binding modes by pH can also be observed. A custom machine learning algorithm was also developed to achieve automatic event classification.     

Novel alternating copolyoxamides with high crystallinity and heat resistance

Two series of novel alternating copolyoxamides (PAnT-alt-n2 and PAn2-alt-62) are synthesized via solution/solid-state polycondensation (SSP). The alternating structures are analyzed carefully with ¹H NMR and ¹³C NMR spectra. The melting behaviors, thermal stabilities, crystal structures and crystallinities are systematically evaluated by DSC, TGA and WAXD. The results reveal that these alternating copolyoxamides possess almost perfect alternating chain structures and have high melting temperature (T_m > 270 °C), high crystallinity (X_c > 32%) and high decomposition temperature (T₅ > 405 °C) as well as low saturated water absorption (<3.5 wt%), which suggests that they have high potential as engineering plastic of high heat resistant.     

Application of fuzzy probability factor superposition algorithm in nuclide identification

Journal of Radioanalytical and Nuclear Chemistry - In this study, a dynamic nuclide identification algorithm based on fuzzy probability factor superposition (FPFS) was proposed for γ spectrum...     

Ultra-high Tg and ultra-low coefficient of thermal expansion polyimide films based on hydrogen bond interaction

To tolerate high processing temperature during the fabrication of low-temperature polycrystalline silicon thin-film transistors (LTPS–TFT) in flexible OLED devices, the polyimide (PI) films, which are used as substrate, should have ultra-high glass transition temperature (T_g > 450°C) and ultra-low coefficient of thermal expansion (CTE at 0–5 ppm K⁻¹). In this paper, two novel heterocyclic monomers, namely, N,N'-(xanthone-2,7-diyl)bis(4-aminobenzamide) (p-DAXBA) and N,N'-(xanthone-2,7-diyl)bis(3-aminobenzamide) (m-DAXBA), which contain a xanthone moiety, are prepared and polycondensed with pyromellitic dianhydride (PMDA), respectively. PI films (PIa and PIb) with intrinsic high T_g and low CTE are designed from the perspective of rigid conjugate xanthone structure and hydrogen bonding interaction. It is found that the PIa films prepared by p-DAXBA have better linear structure of molecular chains and show relatively higher T_g and lower CTE. The T_g of PIa-40 is greater than 450°C, and CTE can reach as low as 2.7 ppm K⁻¹, tensile strength of 179 MPa, modulus of 5.67 GPa, indicating potential application prospect as a flexible OLED substrate.     

Synthesis of molybdenum disulfide/graphene oxide composites for effective removal of U (VI) from aqueous solutions

Journal of Radioanalytical and Nuclear Chemistry - In this study, a novel adsorbents, molybdenum disulfide-graphene oxide (MoS2–GO) composites, is prepared by one-step hydrothermal method and...